SEH SERIES

Pump Type

ISO2858/5199 Process End Suction Centrifugal

Flow Rates

2 - 3000 m3/h

Pressure Head

2.5 - 150m

​

Features

• Large size of oil lubrication bearings

• Different bearing configuration 

• Various sealing options - mechanical & packing

• Range of materials available

• Wear ring between impeller & case to improve run life

• Impellers have axial balancing holes

• Hydraulic parts are optimally designed. The efficiency is high and the high efficiency zone is wide

• Low noise level (5-8 dbA lower than the similar products), little vibration, steady operation and long lifetime.

• Both ANSI & DIN flanges available

SZA SERIES

Pump Type

API 610 OH-1 Process End Suction Centrifugal - Foot Supported

Flow Rates

2.5 - 2600 m3/h

Pressure Head

16 - 250m

(Max. Pressure 25 bar)

Features

• Italian design, high quality performance level

• Foot supported

• Available in both open & closed impeller options

• 3 types of bearing support: wind cooling, air cooling & water cooling

• Design temperature up to 250°C

• Impellers have axial balancing holes

• Hydraulic parts are optimally designed. The efficiency is high and the high efficiency zone is wide

• Single, double & cartridge mechanical seals available 

• Both ANSI & DIN flanges available

SZE SERIES

Pump Type

API 610 OH-2 Process End Suction Centrifugal - Centreline Supported

Flow Rate

Pressure Head

Features

2.5 - 2600 m3/h

16 - 250m

(Max. Pressure 50 bar)

• Italian design, high quality performance level

• Foot supported

• Available in both open & closed impeller options

• 3 types of bearing support: wind cooling, air cooling & water cooling

• Design temperature up to 250°C

• Impellers have axial balancing holes

• Hydraulic parts are optimally designed. The efficiency is high and the high efficiency zone is wide

• Single, double & cartridge mechanical seals available 

• Both ANSI & DIN flanges available

VP SERIES

Pump Type

API 610 OH-3 Vertical Inline Centrifugal Pumps

Flow Rates

up to 600 m3/h

Pressure Head

up to 120 m

Features

• Double volute casing, decreasing radial force & ensure a stable operation

• API 682 standard seal chamber for single, double and tandem seal installs

• Saves on space & foundation

•  API material grade available: S-5. S-6, C-6, A-7, A-8, D-1,D-2

• Bearing bracket between the pump and motor can be used for high temperature applications

• Low weight shaft used

• Spacer coupling provided ensures ease of maintenance during mechanical seal change

• Suction & discharge nozzles as per standard horizontal pump 

SAD SERIES

Pump Type

Hot Oil Centrifugal Pump - EN733/DIN24255 & ISO5199

Flow Rates

4 - 330 m3/h

Pressure Head

3.9 - 96 m

Features

• SAD series pumps have single stage, single volute case. It sucks axially and discharges vertically upward.

• Balancing holes on the impeller vanes that balance the axial force effectively

• Line bearing is used on the pump side and a groove ball bearing is used on the coupling side

• Line bearing is lubricated with the conveyed fluid, the deep groove ball bearing and the double row angular
  contact bell bearing are lubricated with grease

• Temperature at the mechanical seal can be ensured below 150 C°, suitable for safe hot oil use
   

SHV SERIES

Pump Type

Vertical Line Shaft Centrifugal Pumps

Flow Rates

up to 900 m3/h

Pressure Head

up to 150 m

• The SHV series are Centrifugal Vertical Pumps derived from Italian designs

• Pump casing is constantly immersed in the pumped liquid, thus preventing the priming needs and minimising the suction problems.

• standard shaft lengths vary from 1 to 5 m

• Lubrication of the line bearings can be either through the pump discharge or by means of an external source

• Standard support plate has a rectangular shape; round support plate with dimensions
  according to Client’s requirements can also be supplied
   

Features